
Block boundary walls in Málaga, built from the footing up
We build masonry boundaries for villas, townhouses and country homes across Málaga province: setting out, footing, block work, pillars, caps and infill, with one person responsible.
A block boundary wall is a wall built from concrete blocks on a continuous reinforced footing to mark and close a property line; it can be left with a split-face finish, rendered and painted, built low with pillars to carry an infill, or replaced by precast concrete panels set between posts.

Block walls, split-face & concrete panels

Split-face block walls for villas and plots in Málaga
A textured block wall that needs no render or paint. We set it out, dig and pour the footing, lay the courses and finish the pillars and caps.
View details →
Rendered block boundary walls in Málaga province
The classic Andalusian boundary: a block wall finished with render and paint. We build the structure and apply the render so the wall matches the house.
View details →
Low block walls and pillars (murete) built to last
The base of most fences in Spain is a low block wall with pillars. We build that base properly, so whatever goes on top has something solid to stand on.
View details →
Low block wall with a fence on top – one job, one contractor
Privacy above, a solid base below. We build the block wall and pillars and fit the infill, so there is one person responsible for the whole boundary.
View details →
Precast concrete panel fences (placas de hormigón)
A solid, heavy boundary built from factory-made concrete panels that slide into posts. We set out, pour the post footings and assemble the panels in line.
View details →
Party walls between neighbours: building a muro medianero
A wall on the line between two properties belongs to a situation as much as to a plot. We build it once both sides have agreed what, where and who pays.
View details →What do we build?
In short: we build block boundary walls and their foundations – split-face, rendered, low walls with pillars, walls with infill, concrete panel fences and party walls.
We are a contractor, not a manufacturer or a materials shop. We build the whole fence – groundwork, wall, posts and panels. That means we set out the line, dig, pour the reinforced footing, lay the block, build the pillars, fit the caps and, where the design includes one, install the infill on top. Materials come from manufacturers and suppliers, and we can also work with material you supply.
Our work covers boundary walls only. We do not build gates, retaining walls or pool enclosures, and we do not prepare structural calculations or handle permits. Where a project needs one of those, we tell you so at the start and point you in the right direction.
The common thread of everything we build is the part you do not see: a footing designed for the wall and the ground, and pillars tied into it. Our foundations guide explains why that matters.
Which types of block wall can you choose from?
In short: six options: split-face block, rendered block, a low wall with pillars, a low wall with a fence on top, precast concrete panels and party walls.
Each type has its own page with the details, the build steps and what affects its cost:
- Split-face block wall – textured, stone-like block that needs no render or paint.
- Rendered block wall – the classic Andalusian wall, rendered (enfoscado) and painted to match the house.
- Low wall and pillars – the murete that forms the base of most Spanish boundaries.
- Low wall with a fence on top – a block base with slats, boards, mesh or panels above.
- Precast concrete panel fence – factory-made panels slotted between posts, for long, solid boundaries.
- Party wall – a wall on the line shared with a neighbour, and what to agree before building it.
Not sure which fits? Our comparison of split-face, render or concrete panels and the post on block wall or metal fence are good starting points.

Who are our block walls for?
In short: owners of villas and townhouses, communities of owners, businesses with a street front, country homes, and owners who live abroad.
We build for:
- Private owners of villas, townhouses and village houses who want privacy, a solid base for dogs or a finished street front.
- Communities of owners, where walls between gardens or along common areas have to be agreed and built consistently.
- Businesses that need a tidy, solid boundary on a street front.
- Country homes, where a wall around the house is combined with lighter fencing beyond.
- Non-resident owners. Not in Spain? Send photos and the approximate length – we can start with a remote assessment, and we send photos at every stage.
If you are wondering whether a wall is right for you at all, read who a block wall is for.
How we work
- Photos or visit
Send photos and the approximate length via the form or WhatsApp, or we visit the site.
- Measuring and setting out
We measure in linear metres, confirm levels and access, and mark the line and pillar positions.
- Itemised quote
You receive a quote broken down by stages, with its assumptions stated, without commitment.
- Removal and preparation
If included, we remove the old fence and clear the line.
- Footing
We dig, place reinforcement and pour the footing for your wall and ground.
- Wall, pillars and finish
We lay the block, build the pillars, render or point, and fit the caps.
- Infill if chosen
We fit slats, boards, mesh or panels between the pillars.
- Clean-up and handover
We clear the site and walk the wall with you, or send photos if you are abroad.
How do we work, from first contact to handover?
In short: photos or a visit, measuring and setting out, an itemised quote, footing, wall and finish, then clean-up and handover.
Our process is the same whatever the wall:
- Photos or a site visit. You send photos and approximate linear metres, or we visit.
- Measuring and setting out (replanteo). We confirm the line, levels and access.
- Itemised quote. Every stage on its own line, no commitment.
- Footing (cimentación). Excavation, reinforcement and concrete sized for your wall and ground.
- Wall, pillars and infill. Block work, caps and, if chosen, the infill.
- Clean-up and handover. We clear the site and walk the wall with you or send photos.
The steps below summarise the same process. For what happens when the ground or the weather does not cooperate, see what can go wrong during the build.
What affects the cost of a block wall?
In short: length, height, wall type, footing and ground, slope, access, pillars and corners, finish and any removal work – we do not publish prices.
We do not publish prices or a cost per metre, because the site decides most of the cost. What we can show you is what moves it:
- Linear metres and height.
- Wall type and finish.
- Footing size and ground conditions.
- Slope and steps along the line.
- Access for materials.
- Number of pillars, corners and ends.
- Removal of an old fence and clearing the line.
Our article on what a block wall costs in 2026 explains each factor. For general guidance on fence and wall quotes in the province, see our sister site presupuestovalla.eu.
Why do we give itemised quotes?
In short: because a quote broken down by stages shows exactly what you are paying for, makes comparison fair and avoids hidden extras.
Itemised quote, no hidden extras. Each stage of the job appears on its own line: removal of the old fence, excavation, footing, block work, pillars, render or finish, caps, infill and clean-up. The quote states its assumptions – ground, access, who supplies materials – so both sides know what happens if something turns out differently.
That also helps when two neighbours share a wall, or when you want to compare alternatives: a split-face front against a rendered one, or panels against block on the rear. Our post on what owners wish they had known lists the questions worth asking any contractor before you sign.
Do you need permission to build a block wall?
In short: usually some form of municipal permission applies; the route depends on your town's rules and your land, so check with the ayuntamiento.
In Andalucía, the general framework is set by the regional planning law, and each town applies it through its own plan and ordinances. Heights, solid sections, materials and the procedure – licence, declaración responsable or another route – vary from town to town and between urban and rustic land. Urbanisations and communities may add their own rules.
We do not handle permits, but we can give you the description and itemised quote the town may ask for. Our permits guide explains the routes and the questions to ask. If the wall would hold back soil, read garden wall or retaining wall first: that is a job for a technician.
Where in Málaga province do we build?
In short: across Málaga province, on the coast and inland, with local pages for several towns.
We build across the whole province. Local pages cover what to consider in specific towns:
If your town is not listed, the same process applies. Rules are set by each ayuntamiento, so we check them case by case.
Where can you learn more before deciding?
In short: our guides explain foundations, retaining walls, cracks, finishes, permits and slopes; the blog covers costs, comparisons and common mistakes.
Guides:
- Block wall foundations
- Garden wall or retaining wall
- Cracks in boundary walls
- Render and finishes
- Walls on sloping plots
From the blog: is a block wall worth it, common mistakes when choosing a block wall, your first boundary wall in Spain and walls for communities and townhouses.

Where we work
Málaga province: coast, inland towns and fincas.

Block boundary walls in Alhaurín el Grande
Country houses, village homes and villas on the hillsides of Alhaurín el Grande often need a solid boundary near the house. We build block walls here from the footing up.
View details →
Block boundary walls in Coín
In Coín, boundaries range from village garden walls to the edge of rural plots. We build block walls and low walls with pillars where a solid boundary makes sense.
View details →
Block walls and concrete panel fences in Cártama
Cártama combines town homes, newer housing and rural plots. We build block walls and concrete panel fences that suit each, with the footing designed for the ground.
View details →
Block boundary walls in Antequera
Antequera, in the north of Málaga province, has town houses, country properties and agricultural land. We build block walls where a solid boundary is the right answer.
View details →
Block boundary walls in Torrox and Torrox Costa
From the town to Torrox Costa, owners want private gardens and tidy street fronts. We build rendered and split-face walls, low walls with infill and party walls.
View details →
Block boundary walls in Manilva
Manilva sits at the western end of Málaga province's coast. We build block walls and low walls with infill for villas, townhouses and coastal homes here.
View details →Articles and guides

Block wall foundations: what holds a boundary wall up
Most problems in boundary walls start below ground. This guide explains, without jargon, what a footing does and what a contractor should check before pouring one.
View details →Garden wall or retaining wall: why the difference matters
Plots in Málaga are often terraced, and walls end up holding back soil they were never designed for. Here is how to tell the two kinds of wall apart.
View details →
Cracks in boundary walls: reading the signs
Not every crack is a problem, and not every problem shows as a big crack. This guide helps you describe what you see and decide what to do next.
View details →What does a block boundary wall cost in Málaga in 2026?
You will not find a price per metre here. You will find the factors that set the price of a block wall in 2026, so you can read any quote with confidence.
View details →
Is a block boundary wall worth the investment?
A block wall is one of the more substantial ways to mark a boundary. Whether it is worth it depends on what you need it to do, not on the wall itself.
View details →
Common mistakes when choosing a block boundary wall
Most problems with block walls are decided before the first block is laid. These are the choices we see go wrong most often, and how to get them right.
View details →Our specialist sites by fence type
Each fence type has its own site with guides and construction details.

Fencing & boundary walls
Fencing contractor in Málaga province: fence types, permits and areas.
View details →
Aluminium or steel slats
Aluminium slat fences, steel slats, profiled sheet and louvred panels.
View details →
Composite or timber
Composite and timber fences on a low wall or on posts, for garden privacy.
View details →
2D/3D mesh panels or sheet
2D and 3D welded mesh panels, warehouse and plot fencing, metal sheet fences.
View details →
Chain link
Galvanised or plastic-coated chain link for plots, vegetable gardens and country houses.
View details →
Game / livestock fencing
Game, livestock and knotted field fencing, finca boundaries, clearing and setting out.
View details →
Fence quote
What drives the cost of a fence and what an itemised quote should include.
View details →Fence cost calculator
Get a rough estimate by linear metre. The final quote is itemised after we see the site.
Frequently asked questions
What exactly do you build?
Block boundary walls: split-face, rendered, low walls with pillars, walls with an infill, precast concrete panel fences and party walls, including the footing.
Are you a manufacturer or a shop?
No. We are a contractor. We buy materials from manufacturers and suppliers, and we can work with material you supply.
Where do you work?
Across Málaga province, on the coast and inland.
Can I get a quote without coming to Spain?
Yes. Not in Spain? Send photos and the approximate length – we can start with a remote assessment.
Do you publish prices?
No. The cost depends on the site. We give an itemised quote and explain the cost factors.
What is on an itemised quote?
Each stage on its own line: removal, excavation, footing, block work, pillars, finish, caps, infill and clean-up.
Is the quote binding?
The quote is without commitment for you. It states its validity and assumptions.
Do you build gates?
No. We leave openings and pillars ready for a gate specialist.
Do you build retaining walls?
No. Retaining walls need a technician's design. We tell you if your project needs one.
Do you handle permits?
No. The owner is responsible; a local lawyer, gestor or architect can help. We provide the description and quote.
Do you remove old fences?
Yes, as part of building a new wall, including clearing the line.
Can you build on my existing footing?
Only after checking it. Many old footings were built for light fences and cannot carry a wall.
Which wall needs least maintenance?
Split-face block, which does not need painting.
Can you combine wall types on one plot?
Yes. A finished wall at the front and panels or a lighter fence elsewhere is common.
Do you fit infills on the wall?
Yes. We build the low wall and pillars and fit slats, boards, mesh or panels.
Can you build a wall with my neighbour?
Yes, once both owners agree the line, design and cost split.
Can you build on a sloping plot?
Yes, stepping the footing and wall. If the wall would retain soil, a technician must assess it.
Will I get updates if I am abroad?
Yes. We send photos of the footing, the wall and the finished boundary.
How do I contact you?
By phone or WhatsApp on 613 656 443, through the contact form, or by e-mail.
Who runs the business?
Bauman Raymond Attila, autónomo, based in Marbella, working across Málaga province.
Request your itemised quote
Send us photos and the approximate length in metres. We'll reply with a first assessment, no obligation – even if you're not in Spain.