
Party walls between neighbours: building a muro medianero
A wall on the line between two properties belongs to a situation as much as to a plot. We build it once both sides have agreed what, where and who pays.
A party wall, in Spanish muro or pared medianera, is a boundary wall that stands on the dividing line between two properties and is shared by both owners, who normally share its use and the cost of building and maintaining it.
What is a party wall in Spain?
In short: it is a wall on the dividing line between two properties, shared by both owners, which Spanish civil law treats as jointly used unless there is evidence otherwise.
Spanish law calls this situation medianería. Under the Civil Code, a wall dividing gardens or yards, and fences and hedges dividing rural plots, are presumed to be shared unless a title, an external sign or other evidence shows otherwise. The same section of the Code says that the cost of building and repairing shared walls is borne by the owners who benefit from them, in proportion to their right.
For you as an owner this means two things. First, a wall on the shared line is not simply "your" wall: the neighbour has rights over it too. Second, decisions about building it, raising it or repairing it are best agreed in writing before work starts. The network's guide on boundary and party walls explains the background; for specific legal advice, speak to a Spanish lawyer (abogado) or notary.

Build on the line, or just inside your plot?
In short: building fully on your own land avoids shared ownership; building on the line saves space and may halve costs but needs a clear agreement.
There are two ways to separate two properties with a wall:
- On the line. The wall straddles the boundary. Each owner gains a little space, costs can be shared, and the wall becomes a party wall. Everything depends on agreement with the neighbour.
- Inside your plot. The wall stands entirely on your land. You decide its design and pay for it, and you do not need the neighbour's consent to build on your side (municipal rules still apply). You lose the width of the wall and its footing from your garden.
Many foreign owners choose the second route when they do not know the neighbour well or when the neighbour is rarely there. It is simpler to manage from abroad. If you go for a shared wall, our article on walls for communities and townhouses covers the practical side.

What should neighbours agree before a party wall is built?
In short: the exact line, the design and height, who pays for what, access to both sides during the works, and the finish of each face.
We ask both neighbours to settle these points before we set out:
- The line. Where the boundary runs, according to the deeds and, if in doubt, a surveyor (topógrafo).
- The design. Material, height, pillars, infill if any. Both faces will be seen by someone.
- The cost split. Who pays for which part, including any removal of an old fence and any render or paint.
- Access. We need to work from both sides for the footing and for finishing each face.
- The finish of each face. Each owner may want a different finish on their side.
A short written agreement signed by both owners avoids most disputes. Our itemised quote helps, because each line can be allocated to one owner or split between them.
Which rules apply to a party wall?
In short: the same municipal rules as any boundary wall, plus civil-law rules on shared walls, plus any community statutes if the properties are in a community of owners.
A party wall still needs municipal permission like any other boundary wall; see our permits guide. In townhouse developments and urbanisations organised as a community of owners, the community's statutes and the decisions of the owners' meeting may also apply, especially to walls that are visible from common areas.
Where the two plots sit at different levels, a party wall may end up holding back soil from the higher side. That turns it into a retaining wall, which needs a technician. Read garden wall or retaining wall before agreeing a design.
Which wall types work as a party wall?
In short: rendered block, split-face block, a low wall with infill or precast concrete panels can all be used; the choice depends on what both neighbours want to see.
Any of the wall types on this site can stand on a shared line. Practical points:
- A rendered block wall can be painted differently on each side.
- A split-face block wall usually shows the textured face on one side only, unless double-faced block is chosen.
- A low wall with an infill gives privacy with a lighter look and may be easier to agree on.
- Precast concrete panels are quick to assemble on long side boundaries.
Whatever the type, the footing is shared too. It has to be centred on the agreed line and sized for the whole wall.
What affects the cost of a party wall, and how is it split?
In short: the same factors as any block wall, plus finishing both faces, access from both sides and how the neighbours divide the lines of the quote.
A party wall costs what any wall of the same length, height and type costs; the difference is that two people share the decision and often the bill. An itemised quote makes the split easier, because each line can be allocated.
For general guidance on fence and wall quotes see fence and wall quotes. Before committing, our post on what owners wish they had known lists practical points that are easy to overlook.
Official sources
How we build it – step by step
- Meet both owners
We talk to both neighbours, in person or remotely, to understand what each wants.
- Confirm the line
We set out the wall on the agreed boundary, with a surveyor's marks if they exist.
- Itemised quote
We prepare a quote broken down by lines so that costs can be allocated between the owners.
- Excavation and shared footing
We dig and pour a footing centred on the agreed line.
- Wall and pillars
We build the wall in the chosen type, tied into the footing.
- Finishing each face
We render, point or paint each face as each owner has agreed.
- Caps and clean-up
We fit caps, clear both sides of the line and remove our waste.
- Handover to both owners
We show the finished wall to both owners, or send photos to whoever is abroad.
When is it the right choice – and when not?
A good fit if…
- Townhouses and semi-detached houses with small gardens
- Neighbours who agree on design and costs
- Replacing an old shared fence with a solid wall
- Plots where space on each side is tight
Consider another option if…
- Neighbours who disagree about the line
- Plots at different levels where the wall would retain soil
- Owners who want full control of the design (build inside your plot instead)
What affects the cost?
We don't publish fixed prices: every fence is quoted line by line using these factors.
- Length and height of the wall
- Wall type and finish on each face
- Shared footing and ground conditions
- Access from both properties
- Level difference across the line
- Removal of an old shared fence
- Caps and pillars
- How the neighbours divide the lines
Articles and guides

Block walls for communities and townhouses: party walls explained
In a townhouse row or a community of owners, a wall between gardens involves more than one person. Here is who decides, what to agree and which wall types fit.
View details →
Rendered block boundary walls in Málaga province
The classic Andalusian boundary: a block wall finished with render and paint. We build the structure and apply the render so the wall matches the house.
View details →Garden wall or retaining wall: why the difference matters
Plots in Málaga are often terraced, and walls end up holding back soil they were never designed for. Here is how to tell the two kinds of wall apart.
View details →Permits for block boundary walls in Málaga province
Before a block wall goes up, someone has to confirm it is allowed. This guide explains the routes under Andalusian planning law and the questions to ask locally.
View details →
Split-face block walls for villas and plots in Málaga
A textured block wall that needs no render or paint. We set it out, dig and pour the footing, lay the courses and finish the pillars and caps.
View details →Frequently asked questions
Do I need my neighbour's agreement to build a party wall?
For a wall on the shared line, yes in practice: it affects their property. A written agreement signed by both owners is the safest basis. For specific legal questions, consult a Spanish lawyer.
Can I build a wall entirely on my own land instead?
Yes. A wall fully inside your plot is yours alone, subject to municipal rules. You lose a little space but keep full control.
Who pays for a party wall?
Under the Civil Code, the cost of building and repairing shared walls is borne by the owners who benefit from them, in proportion to their right. In practice neighbours usually agree a split and record it.
Can each side have a different finish?
Yes. A rendered wall can be painted differently on each face, and each owner can choose their side's finish within any community rules.
What if the neighbour lives abroad?
We can communicate with both owners remotely and send photos to both. The agreement can be signed in writing without being on site.
Can an old shared fence be replaced?
Yes. We remove the old fence as part of the job, once both owners agree.
What if the plots are at different levels?
Then the wall may retain soil from the higher side, which makes it a retaining wall. A technician needs to assess that before we can build.
Do community rules apply to party walls?
In a community of owners, the statutes and the owners' meeting may have a say, especially on walls visible from common areas. Ask the administrator.
Do I need a permit for a party wall?
Yes, in the same way as for other boundary walls. The route depends on the town and the land.
Can you give each owner a separate quote?
We give one itemised quote for the wall, with lines that can be allocated to each owner. If needed, we can show each owner's share separately.
Planning a block wall? Send us photos
Send photos and the approximate length of your boundary. We reply with questions or a first itemised assessment, without commitment.